Efficient Premium Fine Grinding

Easy operation, reproducible results

Fritsch’sDisk Mill PULVERISETTE 13 premium linegrinds hard-brittle to medium-hard solids down to 0,05 mm fineness. It is ideal for medium particle sizes in the areas of mining and metallurgy, ceramics industry, rocks and soils, glass industry, soil research.

集料罐和研磨腔自动锁紧，安全可靠。由于采用简单的电机驱动调整磨削间隙，并配有数字间隙显示，所有参数均显示在精心设计的显示屏上，操作绝对方便。

The extra powerful motor provides high throughput of up to 150 kg/h. Fast, residue-free cleaning is ensured due to the smooth grinding chamber, inner surfaces, removable funnel and labyrinth sealing of grinding chamber. This Clean Design also protects against sample contamination.

The grinding disks can change the rotational direction (clockwise/counter-clockwise) thereby extending the service life. Grindings disks are available in 4 different materials for optimal adaptation to your sample material. The connection of a dust exhaust system, directly controlled via the instrument, enables dust-free grinding.

Strong team: Disk Mill plus Cyclone separator

Now the Fritsch Disk Mill P-13 premium line can be combined with the high-performance Cyclone separator. This not only simplifies filling and cleaning considerably, but at the same time finer gap widths for higher final fineness can be used without any problems. The strong airflow of the Cyclone separator accelerates the throughput, increases the discharge from the grinding chamber and keeps the thermal load of the samples low, even with materials such as coal or chalk, which are otherwise difficult to grind finely. At the same time, the output of the sample can be actively controlled, and the fine dust load in the vicinity of the mill remains significantly lower. The comminuted sample is fed directly into a screw-on glass and no longer has to be laboriously transferred manually from the drawer.

Watch the video.